EQ Resolve™
Where Intent Becomes Action
EQ Resolve is the real-time reconciliation layer of the EQ platform. It translates Energy Management System (EMS) objectives into safe, feasible, and stable control actions using high-fidelity insight from EQ Wave. Resolve acts as the arbiter between what an EMS intends to do and what the power system can actually support at any moment.
This layer is designed for EMS developers, OEMs, IPPs, and integrators who want a unified, licensable foundation for sensing, constraint enforcement, and deterministic control at the edge, including fully isolated or classified networks where cloud connectivity is limited or not permitted.
The Problem EQ Resolve Addresses
Most EMS platforms are forced to rebuild the same difficult infrastructure for every project:
- Inconsistent or low-resolution sensing
- Unpredictable control paths
- Site-specific variation and brittle logic
- Limited visibility into real-time electrical behavior
- Difficulty ensuring stability under dynamic conditions
These challenges create project delays, system failures, and costly BESS underperformance.
Resolve eliminates this complexity. It provides a stable, physics-grounded integration layer that EMS vendors can build on.
How EQ Resolve Works
Resolve continuously evaluates:
- EMS setpoints and objectives
- Real-time waveform and power data from EQ Wave
- Equipment constraints and operational limits
- Grid and facility conditions
- Safety envelopes and detection thresholds
It then resolves these inputs into control actions that are:
- Safe and feasible — Within equipment and system limits
- Time-aligned — Synchronized with actual grid and system state
- Consistent — Grounded in real electrical behavior
- Stable and robust — Reliable under disturbances and changing conditions
- Repeatable — Predictable across deployments and configurations
Resolve ensures that every EMS command is implemented responsibly, predictably, and with situational awareness.
Key Capabilities
Real-time Feasibility and Constraint Enforcement
Checks EMS requests against equipment limits, system stability, and electrical constraints before executing.
Deterministic Control Translation
Converts high-level objectives (kW targets, reserve requirements, charge windows) into stable control envelopes.
Dynamic Reconciliation
Arbitrates between competing objectives, disturbances, or conflicting constraints in real time.
Safe Dispatch and Tracking
Executes validated output commands through EQ Wave with tight timing and stable loop behavior, and tracks the system response.
Standardized API for EMS Developers
A simple, uniform interface that lets EMS vendors focus on optimization and business logic rather than electrical integration.
Who Resolve Is For
EMS Vendors and OEMs
Looking for a reliable sensing and actuation substrate to reduce integration time and improve consistency.
IPP Platform Teams
Seeking a field-proven foundation for BESS control, monitoring, and dispatch.
DER Aggregators and VPP Operators
Needing deterministic execution at the edge to ensure portfolio-wide reliability.
Microgrid Developers
Requiring safe, unified control behavior across diverse assets and conditions.
Benefits
- Faster EMS deployments with reduced integration time
- Fewer integration headaches and site-specific variations
- Predictable edge behavior and stable control execution
- Improved safety and stability margins
- High-resolution awareness of system state
- Standardized control execution across projects
Resolve + Wave: A Unified Sensing and Control Foundation
EQ Resolve is tightly integrated with EQ Wave, the high-fidelity sensing and edge-compute platform.
EQ Wave provides:
- Continuous waveform data at 32 kHz
- Real-time metrics and diagnostics
- Synchronized timing and edge storage
- Secure actuation pathways
Resolve uses this context to ensure every EMS action is grounded in physical reality.
Together they form a complete, licensable foundation that EMS providers can build their platforms on.
Partnership Model
EQ Resolve is available to select OEMs, EMS vendors, IPPs, and integrators through structured licensing and co-development agreements.
If you are building EMS, microgrid, or grid-connected control solutions, Resolve provides the foundation for:
- Consistent deployments across sites
- Stable, constraint-aware control
- High-fidelity monitoring and diagnostics
- Intelligent operation grounded in physics
For partnership inquiries, contact partnerships@eq.systems.
Technical Integration
Resolve provides a standardized API for EMS developers, allowing them to:
- Submit Control Intent — Send high-level objectives such as setpoints, charge/discharge schedules, and optimization targets
- Receive Feasibility Feedback — Get real-time validation of whether requested actions are safe and achievable
- Execute Validated Actions — Resolve translates validated intent into precise control commands for physical systems
- Monitor Execution — Track how the system responds to commands with high-resolution feedback
This abstraction allows EMS developers to focus on optimization algorithms and business logic, while Resolve handles the complex physics of safe, stable execution.
Status
- Field-proven sensing hardware (EQ Wave) with control-grade data flow
- Field-tested sensing and control concepts on live EMS and microgrid projects
- Defined architectural roadmap for partner integration
- Now onboarding early partners for structured POCs
Related Platform Components
- EQ Wave™ — High-fidelity sensing and edge compute
- EQ Syntropy™ — Analytics and processing engine
- EQ Sight™ — Visualization and reporting
EQ Resolve™— Where intent becomes action.
Discuss EMS Integration
Discuss using EQ Resolve and EQ Wave as a sensing and control foundation for your EMS, BESS, or microgrid projects.
